产品分类
联系我们
Jinan Hongyuan Electric Co., Ltd
Address: No.15 Lanxiang Road, Tianqiao Area,Jinan,Shandong,China
Tel: 0086-0531-88190005
Fax: 0086-0531-58988677
Wechat: ch_rocky
Mobile/Whatsapp: 0086-15254819073
Skype: laser.tube.power.supply
QQ:  2869601953
Products
HY-T150-HX King Rabbit Co2 Laser Cutting Machine Power Supply
HY-T150-HX King Rabbit Co2 Laser Cutting Machine Power Supply
150W King Rabbit Co2 Laser Machine Power Supply
Model: HY-T150-HX
 

Description:
Model: HY-T150-HX for 100w,120w,130w,150w Co2 Laser Tubes
Alias: Co2 Laser Generator, Co2 Laser Source,Co2 Laser Device,High Voltage Power Supply

Application:
HY-T150-HX Laser Power Supply is used for 100W,120W,130W,150W Cutting and Engraving Acrylic, Fabric, Double Color Sheet and Rubber,etc

Main features:
1. Good compatibility: It can be applicable to 100W, 120W, 130W, 150W laser cutting machine manufactured by different factories.
2. HY-T150-HX main difference from HY-T150 is that its HV+ side uses High Voltage Connector replace the long cable.
High output Voltage and high output Current: when input AC220V and output current up to 38mA,the Voltage can be up to 50KV.
3. High Voltage Power Supply: Input AC 220V or AC 110V Voltage ,Max output DC 50KV.
4. This Power Supply has the” TEST” button which can test output laser manually.
5. Fast response speed: It can observably enlarge laser power and prolong laser tube’s service life.

Advantages:
1. Easy Control: The start and stop of laser can be easily controlled by TTL level. Both 0-5V analog signal and 5V PWM signal can control the laser power.
2. The Laser Power Supply has output open circuit protection.
3. This Laser power supply has TTL signal indication, water through signal indication and laser output indication.

Specification of HY-T150-HX Power Supply :

 
Input
Input Voltage
AC220V or AC110V(to be specified when placing order)
AC frequency
47—440HZ
Max Input Power
1000W
 
Max Input Current
10A
 
Output
Max Output Voltage
DC 50KV
Max Output Current
DC 38mA
Efficiency
≥90﹪(full load)
Mean Time Between Failure (MTBF)
≥10000H
Response Speed
≤1ms(from the switch Signal is given to the output current up to 90% of the setting current)
Control Interface
TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification) 
Pressure-proof
Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is connected with machine shell.
Protection
can work in open-circuit condition for a short time(Require a good protective earthing and avoid arc between the positive and the machine shell)
Environmental
Operating Temperature:-10~40℃,Relative Humidity (RH):≤90﹪
Cooling Way
Force-Air Cooling (FAC)
Dimension
L×W×H=325*240*95(mm)

Technical Support:
1. All our item is pass the ISO9001 and CE quality Certification.
2. We are the manufactory of the Co2 Laser Power Supply, and have strict quality control system, so that we can supply the best quality products with lowest prices for our client.
3. We have a professional technical support group for all the item selling. If you need any assistance on your item problem, please do not hesitate to contact us, our technical support will be there to assist you.
5. Manual testing: Make sure the power supply and laser tube wiring correct firstly, offline the control line and then press the red button TEST to test laser tube out light or not, this method can be simple judgment power supply is working correctly.

Warranty:
One year
If the Laser Power Supply appeared problem during this period, we can send Free Pars for your repairing.

 
MSN online 鲁ICP备05020606 Friendly link