产品分类
联系我们
Jinan Hongyuan Electric Co., Ltd
Address: No.15 Lanxiang Road, Tianqiao Area,Jinan,Shandong,China
Tel: 0086-0531-88190005
Fax: 0086-0531-58988677
Wechat: ch_rocky
Mobile/Whatsapp: 0086-15254819073
Skype: laser.tube.power.supply
QQ:  2869601953
Products
HY-E150 CO2 Laser Power Supply
HY-E150 CO2 Laser Power Supply
130W-150W EFR CO2 Laser Tube Power Supply
Model: HY-E150

Description:
Model: HY-E150 for EFR 130w, 150w Co2 Laser Tubes
Alias: Co2 Laser Generator, Co2 Laser Source,Co2 Laser Device,High Voltage Power Supply

Application:
HY-E150 Laser Power Supply is used for 100W,120W, 130W,150W Cutting and Engraving Acrylic, Fabric, Double Color Sheet and Rubber,ect.

Main Features:
1. Good compatibility: E150 Power Supply is special designed for EFR 130w,150w Laser Tubes. Also can driver common 130W, 150W laser tubes from other factories.
2. High Voltage Power Supply: Input AC 220V or AC 110V Voltage ,Max output DC 50KV.
3. You can choose Cutting Type or Sculpring Type; the Cutting Type has a good power stability and strong adaptability; the Sculpring Type has a quick response speed and good engraving effect.
4. This Power Supply has the” TEST” button which can test output laser manually.

Advantages:
1. Easy Control: The start and stop of laser can be easily controlled by TTL level. Both 0-5V analog signal and PWM signal can control the laser power.
The Laser Power Supply has output open circuit protection. when the earth connection is under good situation, Power can be short time work in open state, it Can avoid the laser tube burst damage caused by laser power supply, prolong the EFR laser tubes service life.
2. This Laser power supply has TTL signal indication, water through signal indication and laser output indication.
3. The power has feedback interface, can be used for closed-loop control, also can be used for testing the laser tube working current.
It can quickly judge laser tube is damaged or laser power supply is damaged at the scene, greatly facilitate the on-site maintenance.

HY-E150 Power Supply Specification

 
Input
Input Voltage
AC220V or AC110V(to be specified when placing order)
AC frequency
47—440HZ
Max Input Power
1000W
 
Max Input Curret
10A
 
Output
Max Output Voltage
DC 50KV
Max Output Current
DC 38MA
Efficiency
≥90﹪(full load)
Mean Time Between Failure (MTBF)
≥10000H
Response Speed
≤1ms(from the switch Signal is given to the output current up to 90% of the setting current)
Control Interface
TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification) 
Pressure-proof
Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is connected with machine shell.
Protection
can work in open-circuit condition for a short time(Require a good protective earthing and avoid arc between the positive and the machine shell)
Environmental
Operating Temperature:-10~40℃,Relative Humidity (RH):≤90﹪
Cooling Way
Force-Air Cooling (FAC)
Dimension
L×W×H=342*138*105(mm)

Technical Support:
1. All our item is pass the ISO9001 and CE quality Certification.
2. We are the manufactory of the Co2 Laser Power Supply, and have strict quality control system, so that we can supply the best quality products with lowest prices for our client.
3. We have a professional technical support group for all the item selling. If you need any assistance on your item problem, please do not hesitate to contact us, our technical support will be there to assist you.
4. Manual testing: Make sure the power supply and laser tube wiring correct firstly, offline the control line and then press the red button TEST to test laser tube out light or not, this method can be simple judgment power supply is working correctly.

Warranty:
One year.
If the Laser Power Supply appeared problem during this period, we can send Free Pars for your repairing.

 
MSN online 鲁ICP备05020606 Friendly link