产品分类
联系我们
Jinan Hongyuan Electric Co., Ltd
Address: No.15 Lanxiang Road, Tianqiao Area,Jinan,Shandong,China
Tel: 0086-0531-88190005
Fax: 0086-0531-58988677
Wechat: ch_rocky
Mobile/Whatsapp: 0086-15254819073
Skype: laser.tube.power.supply
QQ:  2869601953
Products
150W-350W Precise Xenon Lamp Power Supply
150W-350W Precise Xenon Lamp Power Supply

 

一、Main Features:
1、Wide Input Voltage(AC90V-AC260V), can be used in different standard input voltage.
2、Internal and external transformation function is simple, it is convenient for transformation of Power Supply internal control and external switch control.
3、The current can be adjusted 1-16A,suggest starting current is higher than 5A.
4、High efficiency of the whole machine and improve the load over current protection, overload protection, increase the power supply reliability effectively
5、Design of Constant current and trigger module integration , the output line connect the xenon lamp directlry, easily for using
6、This Xenon Lamp Power Supply can work 150W-350W Spherical short arc xenon lamp 。

 二、Specification 

[Input ]

Input Voltage AC90V-AC260V
 AC Frequency 50/60HZ
 Cold Surge Current ≤60A(AC220V Input) ≤30A(AC110V Input)
 Leakage Current
 ≤0.7mA(AC220V Input) ≤0.4mA(AC110V Input)


[Output]

 Voltage Ripple and Noise <100mV
 Output Current DC1~7.5A(150W),DC1~16A(350W)
 Output Voltage DC20V
 Current Ripple and Noise <100mA
 Temperature drift (boot half an hour) <100ppm/℃
 Stability (boot half an hour) <0.1%

[Efficiency] ≥90%(Full load)

[MTBF] ≥50000H

[Withstan Voltage] Input - output, input - casing :AC1500V 10mA 60s;Output - casing :DC100V 10mA 60s

[Protection] Output over current protection, overload protection

[Environment Operating] Temperature(-10~40)℃ ,Relative humidity:≤90%

[Cooling] Force-Air Cooling(FAC)

[Dimesition] L×W×H= 258× 156× 67 (mm)

[Net Weight] 1.65kg

三、Instructions
1、Pay attention to the positive and negative output, ensure thant Xenon Lamp Positive Pole connects Power Supply Positive Pole and Xenon Lamp Negative Pole connects Power Supply Negarive Pole ( red marker is positive, black mark is cathode), it is strictly prohibited to reverse connection, avoid damaging the xenon lamp.
2、After Xenon lamp extinguishes you should wait for 3 minutes to restart it again, avoid damageing the xenon lamp electrodes 。
3、It is forbidden to keep out of xenon lamp power supply vents and fans 。
4、 If Xenon Lamp Power Supply is placed in another case, make sure the air inside the case and outside air convection, so as to have heat dissipation effect, otherwise easy to cause overheating inside the case and damage of xenon lamp power supply.

四: Application: Varitety of of precise optical instruments,meters,teaching equipment,medical equipment.

五、Warning
Output terminal with high Voltage, probibiting no-load and measurement the output voltage directly across them !!!

 
MSN online 鲁ICP备05020606 Friendly link